Tag Archives: brass reducer

China Brass Compression Fittings Reducer Tube Fittings Compression Conversion Coupling coupling and types of coupling

Merchandise Description

  • Sizes: Male 3/8-18 Feminine 9/sixteen-18
  • Link Hoses or Fittings of US plumbing: This is employed to adapt the plumbing to NPT on the tub or kitchen fixtures, and European hose fittings
  • Easy to Set up: It has a hexagonal section in the middle for an enhanced bearing floor when changing the fitting with a wrench
  • Brass for corrosion resistance, ductility at higher temperatures, and minimal magnetic permeability
  • Hex nut development for tighter, leak-cost-free connections
  • Appropriate with stainless steel, copper, rigid and semi-rigid plastic tubing
  • Temperature assortment:  -sixty five to 250 degrees F

 

Union Assortment

The offered union by LM-LS  is developed with utmost precision in conformity with the International Quality Requirements. 

Union Specification ASTM A182 / ASTM SA182, ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A694 / ASME SA694, ASTM B462 / ASME SB462 / ASTM B564 / ASME SB564, ASTM B151 / ASME SB151, ASTM B381 / ASME SB381
Union Producing Method Forging / Socket / Threaded / Screwed
Union Obtainable Other Grades Stainless Steel – F304, F304L, F304H, F310s, F316, F316L, F317L, F321, F347, F904L, F410, F446 and so forth.
Carbon Steel – 105N, LF2, F42, F46, F52, F56, F60, F65 and so on.
Alloy Steel – F5, F9, F11, F22, F91, 4140, Course 1, 2, 3 etc.
Duplex and Tremendous Duplex – F51, F53, F55, UNS N 0571 03, UNS N032750, UNS N5710, and many others.
Inconel – 600, 601, 625, 718, UNS N 0571 , UNS N 0571 1, UNS N 0571 5, UNS N5718 etc.
Incoloy – 800, 800H, 800HT, 825, UNS N08800, UNS N08810, UNS N08811, UNS N08825 and so on.
Monel – four hundred, UNS N04400 and so forth.
Hastelloy – C276, C22, UNS N571276, UNS N06571, etc.
Titanium – Quality 2, Quality 3, UNS R50400, UNS R56200 and many others.
Copper Nickel – ninety/ten, 70/thirty, UNS C71500, UNS C70600 and so forth.
Other – Alloy twenty, SMO 254, F44, 6 Moly, UNS N 0571 1, UNS N57154 and so forth.
Union Outer Diameter one/8″ NB TO 4″ NB (DN6 to DN100)
Union Force Course 2000 LBS, 3000 LBS, 6000 LBS,9000 LBS, or As Per Custom made Prerequisite
Union Elbow Other Fittings Types 45 Diploma Elbow, ninety Diploma Elbow, Lateral, Tee, Reducer Insert, Complete Coupling, Fifty percent Coupling, Lowering Coupling, Cap, Union, Cross, Boss, Plug, Bushing, and many others.
Union Dimension ASME sixteen.11 – Socket Welding and Threaded Forged Fittings
MSS SP-seventy nine – Socket Welding Reducer Inserts
MSS SP-83 – Socket Weld Union
MSS SP-ninety five – Swage(d) Nipples and Bull Plugs
BS 3799 – Specification for Steel Pipe Fittings, Screwed and Socket-welding for the petroleum market.
Union Other Screening Tensile, Hardness Test, Chemical Evaluation – Spectro Evaluation, Positive Substance Identification – PMI Tests, Flattening Test, Micro, and Macro Test, Pitting Resistance Take a look at, Flaring Examination, Intergranular Corrosion (IGC) Check, NACE MR0175, Ultrasound Test, ASTM A262 Apply E, Charpy Influence Examination, Grain Dimension, Dye Penetrant Examination, and so on.
Union Packaging Carrate / Wooden Pallet / Wooden box-a
Union Cargo & Transportation By Street – Truck / Prepare Partial Load, Full Load, By Sea – Break-bulk Standard Vessel / FCL (Entire Container Load) / LCL (Considerably less Container Load) / twenty Toes Container / 40 Ft Container / 45 Ft Container / Substantial Cube Container / Open up Best Container, By Air – Freighter Civil Passenger and Cargo Planes
Union Materials Examination Certification Producer Take a look at Certification As For each EN15714 3.1, 3.2 / Laboratory Examination Certificate From NABL Accepted Lab. / Under Third Social gathering Inspection Agency Like SGS, TUV, DNV, LLOYDS, Stomach muscles, Bureau of Indian Expectations BIS Accepted Etc

 

Our Rewards

    1. Made from higher-quality raw resources. 
    2. Immediate competitive manufacturing facility value. 
    3. ODM/OEM and custom-made solutions are welcome. 
    4. Free samples will be supplied. 
    5. Reliable QC system.
    6. On-time Supply.
     7. Complete R&D facilities and Exceptional crew.
 

FAQ

Q1: Are you a manufacturer or a buying and selling business?

A: We are a brass fittings maker and we also created the business of paint tools buying and selling these several years.
 

Q2: What are your primary merchandise?

A: We give all kinds of quality brass fittings, such as brass hose fittings, pipe fittings, compression fittings, etc. In addition to brass fittings, we create the investing enterprise of painting resources, like paint brushes, paint rollers, knee pads, putty knives, and other pertinent goods.
 

Q3: Do you have a certificate? 

A: Of course, ISO, ROHS, SGS, Content Certification.
 

Q4: How can I get the samples?

A: Typically, we could send out you the samples for Totally free, and you just require to spend the courier fee.
If there are as well several samples, then you nevertheless need to have to undertake the sample charge, but they can be refundable right after you location the get.
 

Q5: If there is any quality problem, how do you remedy it?

A: Typically, our good quality Warranty after the product sales is 1 yr. Just speak to us if there are any problems you located. Typically alternative, or payment, or resend goods to you on subsequent orders as per the situation. To be reviewed as for each the issue.
 

Q6: Why chooses us?

A: Far more than 20 several years in the business. It tends to make us specialist. Our workers of engineers provides high-valued design and style advice to assure merchandise overall performance and effectiveness. And We often focus on Good quality, our strict adherence to demanding top quality control and tolerance specifications leads to the less difficult assembly of concluded elements at your facility. 

 


/ Piece
|
100 Pieces

(Min. Order)

###

Warranty: 1 Year
Standard: GB3289.37,3298.38-82
Technique: Forged
Nominal Diameter: DN15
Type: Threaded Union
Material: Brass, Stainless Steel

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Union Specification ASTM A182 / ASTM SA182, ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A694 / ASME SA694, ASTM B462 / ASME SB462 / ASTM B564 / ASME SB564, ASTM B151 / ASME SB151, ASTM B381 / ASME SB381
Union Manufacturing Process Forging / Socket / Threaded / Screwed
Union Available Other Grades Stainless Steel – F304, F304L, F304H, F310s, F316, F316L, F317L, F321, F347, F904L, F410, F446 etc.
Carbon Steel – 105N, LF2, F42, F46, F52, F56, F60, F65 etc.
Alloy Steel – F5, F9, F11, F22, F91, 4140, Class 1, 2, 3 etc.
Duplex and Super Duplex – F51, F53, F55, UNS N031803, UNS N032750, UNS N032760, etc.
Inconel – 600, 601, 625, 718, UNS N06600, UNS N06601, UNS N06625, UNS N07718 etc.
Incoloy – 800, 800H, 800HT, 825, UNS N08800, UNS N08810, UNS N08811, UNS N08825 etc.
Monel – 400, UNS N04400 etc.
Hastelloy – C276, C22, UNS N010276, UNS N06022, etc.
Titanium – Grade 2, Grade 3, UNS R50400, UNS R56200 etc.
Copper Nickel – 90/10, 70/30, UNS C71500, UNS C70600 etc.
Other – Alloy 20, SMO 254, F44, 6 Moly, UNS N08020, UNS N031254 etc.
Union Outer Diameter 1/8" NB TO 4" NB (DN6 to DN100)
Union Pressure Class 2000 LBS, 3000 LBS, 6000 LBS,9000 LBS, or As Per Custom Requirement
Union Elbow Other Fittings Types 45 Degree Elbow, 90 Degree Elbow, Lateral, Tee, Reducer Insert, Full Coupling, Half Coupling, Reducing Coupling, Cap, Union, Cross, Boss, Plug, Bushing, etc.
Union Dimension ASME 16.11 – Socket Welding and Threaded Forged Fittings
MSS SP-79 – Socket Welding Reducer Inserts
MSS SP-83 – Socket Weld Union
MSS SP-95 – Swage(d) Nipples and Bull Plugs
BS 3799 – Specification for Steel Pipe Fittings, Screwed and Socket-welding for the petroleum industry.
Union Other Testing Tensile, Hardness Test, Chemical Analysis – Spectro Analysis, Positive Material Identification – PMI Testing, Flattening Test, Micro, and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test, NACE MR0175, Ultrasound Test, ASTM A262 Practice E, Charpy Impact Test, Grain Size, Dye Penetrant Test, etc.
Union Packaging Carrate / Wooden Pallet / Wooden box-a
Union Shipment & Transportation By Road – Truck / Train Partial Load, Full Load, By Sea – Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air – Freighter Civil Passenger and Cargo Planes
Union Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

/ Piece
|
100 Pieces

(Min. Order)

###

Warranty: 1 Year
Standard: GB3289.37,3298.38-82
Technique: Forged
Nominal Diameter: DN15
Type: Threaded Union
Material: Brass, Stainless Steel

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Union Specification ASTM A182 / ASTM SA182, ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A694 / ASME SA694, ASTM B462 / ASME SB462 / ASTM B564 / ASME SB564, ASTM B151 / ASME SB151, ASTM B381 / ASME SB381
Union Manufacturing Process Forging / Socket / Threaded / Screwed
Union Available Other Grades Stainless Steel – F304, F304L, F304H, F310s, F316, F316L, F317L, F321, F347, F904L, F410, F446 etc.
Carbon Steel – 105N, LF2, F42, F46, F52, F56, F60, F65 etc.
Alloy Steel – F5, F9, F11, F22, F91, 4140, Class 1, 2, 3 etc.
Duplex and Super Duplex – F51, F53, F55, UNS N031803, UNS N032750, UNS N032760, etc.
Inconel – 600, 601, 625, 718, UNS N06600, UNS N06601, UNS N06625, UNS N07718 etc.
Incoloy – 800, 800H, 800HT, 825, UNS N08800, UNS N08810, UNS N08811, UNS N08825 etc.
Monel – 400, UNS N04400 etc.
Hastelloy – C276, C22, UNS N010276, UNS N06022, etc.
Titanium – Grade 2, Grade 3, UNS R50400, UNS R56200 etc.
Copper Nickel – 90/10, 70/30, UNS C71500, UNS C70600 etc.
Other – Alloy 20, SMO 254, F44, 6 Moly, UNS N08020, UNS N031254 etc.
Union Outer Diameter 1/8" NB TO 4" NB (DN6 to DN100)
Union Pressure Class 2000 LBS, 3000 LBS, 6000 LBS,9000 LBS, or As Per Custom Requirement
Union Elbow Other Fittings Types 45 Degree Elbow, 90 Degree Elbow, Lateral, Tee, Reducer Insert, Full Coupling, Half Coupling, Reducing Coupling, Cap, Union, Cross, Boss, Plug, Bushing, etc.
Union Dimension ASME 16.11 – Socket Welding and Threaded Forged Fittings
MSS SP-79 – Socket Welding Reducer Inserts
MSS SP-83 – Socket Weld Union
MSS SP-95 – Swage(d) Nipples and Bull Plugs
BS 3799 – Specification for Steel Pipe Fittings, Screwed and Socket-welding for the petroleum industry.
Union Other Testing Tensile, Hardness Test, Chemical Analysis – Spectro Analysis, Positive Material Identification – PMI Testing, Flattening Test, Micro, and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test, NACE MR0175, Ultrasound Test, ASTM A262 Practice E, Charpy Impact Test, Grain Size, Dye Penetrant Test, etc.
Union Packaging Carrate / Wooden Pallet / Wooden box-a
Union Shipment & Transportation By Road – Truck / Train Partial Load, Full Load, By Sea – Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air – Freighter Civil Passenger and Cargo Planes
Union Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

Types of Couplings

A coupling is a device that connects two shafts and transmits power from one to the other. Its main purpose is to join two pieces of rotating equipment. It also allows for some degree of misalignment or end movement. Here are a few examples of coupling types: Beam coupling, Flexible coupling, Magnetic coupling, and Shaft coupling.
gearbox

Beam coupling

Beam couplings are used to couple motors and other devices. They are available in several types, including flexible, slit, and rigid beam couplings. Each has unique properties and characteristics. These couplings are best for applications requiring a high level of precision and long life. They are also a practical solution for the connection of stepping and servo motors with screw rods.
Beam couplings are usually made of stainless steel or aluminum alloy, and feature spiral and parallel cut designs. Multiple cuts allow the coupling to accommodate multiple beams and improve angular and parallel misalignment tolerances. Additionally, beam couplings are comparatively cheaper than other types of rotary joints, and they require minimal maintenance.
The materials of a beam coupling should be considered early in the specification process. They are typically made of aluminum or stainless steel, but they can also be manufactured from Delrin, titanium, and other engineering grade materials. Beam couplings are often available in multiple sizes to fit specific shaft diameters.
Beam couplings are a key component of motion control systems. They provide excellent characteristics when used properly, and they are a popular choice for many applications. A thorough understanding of each type of coupling will help to prevent coupling failure and enhance system performance. Therefore, it is important to choose the right coupling for your application.
Various types of beam couplings have unique advantages and disadvantages. The FCR/FSR design has two sets of three beams. It is available in both metric and inch shaft sizes. The FCR/FSR couplings are ideal for light-duty power transmission applications. A metric shaft is more suitable for these applications, while an inch shaft is preferred for heavier duty applications.
Two types of beam couplings are available from Ruland. The Ruland Flexible beam coupling has a multi-helical cut design that offers a greater flexibility than commodity beam couplings. This design allows for higher torque capabilities while minimizing wind-up. In addition, it is also more durable than its commodity counterparts.

Flexible coupling

A flexible coupling is a versatile mechanical connection that allows for the easy coupling of two moving parts. The design of these couplings allows for a variety of stiffness levels and can address a variety of problems, such as torsional vibrations or critical speed. However, there are a number of tradeoffs associated with flexible couplings.
One of the biggest issues is the installation of the coupling, which requires stretching. This problem can be exacerbated by cold temperatures. In such a case, it is vital to install the coupling properly. Using a gear clamp is one of the most important steps in a successful installation. A gear clamp will keep the coupling in place and prevent it from leaking.
Another common type of flexible coupling is the gear coupling. These couplings are composed of two hubs with crowned external gear teeth that mesh with two internally splined flanged sleeves. The massive size of the teeth makes them resemble gears. Gear couplings offer good torque characteristics but require periodic lubrication. These couplings can also be expensive and have a limited number of applications.
Another type of flexible coupling is the SDP/SI helical coupling. These couplings can accommodate axial motion, angular misalignment, and parallel offset. This design incorporates a spiral pattern that makes them flexible. These couplings are available in stainless steel and aluminum.
A flexible coupling has a wide range of applications. Generally, it is used to connect two rotating pieces of equipment. Depending on its design, it can be used to join two pieces of machinery that move in different directions. This type of coupling is a type of elastomeric coupling, which has elastic properties.
There are many types of flexible couplings available for different types of applications. The purpose of a flexible coupling is to transmit rotational power from one shaft to another. It is also useful for transmitting torque. However, it is important to note that not all flexible couplings are created equally. Make sure to use a reputable brand for your coupling needs. It will ensure a reliable connection.
The simplest and most commonly used type of flexible coupling is the grid coupling. This type of coupling uses two hubs with slotted surfaces. The steel grid is allowed to slide along these slots, which gives it the ability to flex. The only limitation of this type of coupling is that it can only tolerate a 1/3 degree misalignment. It can transmit torques up to 3,656 Nm.
gearbox

Magnetic coupling

Magnetic coupling is a technique used to transfer torque from one shaft to another using a magnetic field. It is the most common type of coupling used in machinery. It is highly effective when transferring torque from a rotating motor to a rotating shaft. Magnetic couplings can handle high torques and high speeds.
Magnetic coupling is described by the energy difference between a high-spin state and a broken symmetry state, with the former being the energy of a true singlet state. In single-determinant theories, this energy difference is called the Kij. Usually, the broken-symmetry state is a state with two interacting local high-spin centers.
The magnetic coupling device is regarded as a qualitative leap in the reaction still industry. It has solved a number of problems that had plagued the industry, including flammability, explosiveness, and leakage. Magnetic couplings are a great solution for many applications. The chemical and pharmaceutical industries use them for various processes, including reaction stills.
Magnetic couplings are a good choice for harsh environments and for tight spaces. Their enclosed design keeps them fluid and dust-proof. They are also corrosion-resistant. In addition, magnetic couplings are more affordable than mechanical couplings, especially in areas where access is restricted. They are also popular for testing and temporary installations.
Another use for magnetic coupling is in touch screens. While touch screens use capacitive and resistive elements, magnetic coupling has found a cool new application in wireless charging. While the finger tracking on touch screens may seem like a boley job, the process is very sensitive. The devices that use wireless charging need to have very large coils that are locked into resonant magnetic coupling.
Magnetic couplings also help reduce hydraulic horsepower. They cushion starts and reduce alignment problems. They can also improve flow in oversized pumps. A magnetic coupling with an 8 percent air gap can reduce hydraulic HP by approximately 27 percent. In addition, they can be used in aggressive environments. They also help reduce repair costs.
Magnetic couplings are a great choice for pumps and propeller systems because they have the added advantage of being watertight and preventing shaft failure. These systems also have the benefit of not requiring rotating seals.
gearbox

Shaft coupling

A shaft coupling joins two shafts and transmits rotational motion. Generally, shaft couplings allow for some degree of misalignment, but there are also torque limiters. Selecting the right coupling can save you time and money and prevent equipment downtime. Here are the main features to consider when purchasing a coupling for your application.
Shaft couplings should be easy to install and disassemble, transmit full power to the mated shaft, and reduce shock loads. A shaft coupling that does not have projecting parts should be used for machines that move or rotate at high speeds. Some types of shaft couplings are flexible while others are rigid.
Shaft couplings can be used in a variety of applications, including piping systems. They can be used to connect shafts that are misaligned and help maintain alignment. They can also be used for vibration dampening. Shaft couplings also allow shafts to be disconnected when necessary.
Shaft couplings can accommodate a certain amount of backlash, but this backlash must be well within the tolerance set by the system. Extremely high backlash can break the coupling and cause excessive wear and stress. In addition, excessive backlash can lead to erratic alignment readings. To avoid these issues, operators must reduce backlash to less than 2deg.
Shaft couplings are often referred to by different names. Some are referred to as “sliced” couplings while others are known as “slit” couplings. Both types offer high torque and torsional stiffness. These couplings are typically made from metals with various alloys, such as acetal, stainless steel, or titanium.
CZPT Pulley produces shaft couplings for a variety of applications. These products are used in high-power transmission systems. They have several advantages over friction couplings. In addition to minimizing wear, they don’t require lubrication. They are also capable of transmitting high torque and high speeds.
Another type of shaft coupling is the universal coupling. It is used to transmit power to multiple machines with different spindles. Its keyed receiving side and flanges allow it to transmit power from one machine to another.
China Brass Compression Fittings Reducer Tube Fittings Compression Conversion Coupling     coupling and types of couplingChina Brass Compression Fittings Reducer Tube Fittings Compression Conversion Coupling     coupling and types of coupling
editor by CX 2023-03-29